What is the Heat Exchanger Sizing multi-solver?

Heat Exchanger Sizing is a guided workflow that chains 3 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.

Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.

Fluids & Energy Pack · Multi-Solver

Heat Exchanger Sizing

Flow & heat transfer. This multi-solver chains 3 solvers into a single guided workflow — run each step in order and carry the result forward.

Workflow steps

or unlock everything with Pro →

Fluid

open full solver →

2D Fluid (CFD) StudioLive

Stam stable-fluids · Navier–Stokes

Controls

Speed1×

Click and drag on the canvas to inject dye and velocity.

Presets

Viscosity

Injection force

Dye amount

▶ Run in Python

Data Inspector

Grid96×96

Total dye0

Mean speed0.000

Max speed0.000

Enstrophy0.00e+0

Governing equation

\frac{\partial u}{\partial t} + (u \cdot \nabla) u = - \frac{\nabla p}{ρ} + 1.0 e - 7 \nabla^{2} u, \nabla \cdot u = 0

Reading this result: Near-zero viscosity: momentum barely dissipates, so vortices persist and the flow tips into turbulent, chaotic mixing.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Thermal Resistance

open full solver →

Composite Wall Heat TransferLive

R-value & U-value

Controls

Presets

Drywall (mm)

Insulation (mm)

Brick (mm)

Inside temp (°C)

Outside temp (°C)

Heat flows through a wall like current through resistors in series. Each layer's thermal resistance is its thickness over its conductivity; adding them gives the total R-value, and the heat flux is the temperature difference divided by it. Insulation, with very low conductivity, dominates the R-value — the steep temperature drop shows where it does its work.

▶ Run in Python

Data Inspector

Total R-value2.71 m²K/W

U-value0.37 W/m²K

Heat flux9.6 W/m²

Governing equation

R = \sum \frac{L _{i}}{k _{i} A} = 2.71 \frac{m ^{2} K}{W}, Q = \frac{Δ T}{R} = 9.6 \frac{W}{m ^{2}}

Reading this result: The insulation layer carries the most thermal resistance, so the temperature falls most steeply across it. A total R-value of 2.71 m²K/W lets 9.6 W/m² flow for this 26°C difference.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Heat 3d

open full solver →

3D Heat Diffusion StudioLive

3D finite difference · ∂u/∂t = α∇³u

Controls

Speed1×

Presets

Diffusivity α

▶ Run in Python

Data Inspector

Grid40³

Cells64,000

SchemeExplicit FD

Governing equation

\frac{\partial u}{\partial t} = 0.12 \nabla^{2} u = 0.12 (u_{xx} + u_{y y} + u_{z z})

Reading this result: Heat spreads outward at a rate set by the diffusivity — each cell relaxes toward the average of its six neighbors every step.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

Need a private, branded version?

We build custom solvers and workflows for labs, firms, agencies, and courses — your parameters, your branding, your data.

Explore Custom Solver Sets →

More in the Fluids & Energy pack

Airfoil & Wing Lab Pump & Piping System HVAC Duct Designer Wind Turbine Yield Nozzle & Jet Compressor Map Pipeline Network Cooling Fan Selection

Frequently asked questions

What is the Heat Exchanger Sizing multi-solver?: Heat Exchanger Sizing is a guided workflow that chains 3 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.
Is it free to use?: Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.