What is the Wind Load Package multi-solver?

Wind Load Package is a guided workflow that chains 3 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.

Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.

Structural & Geotechnical Pack · Multi-Solver

Wind Load Package

Pressure to base shear. This multi-solver chains 3 solvers into a single guided workflow — run each step in order and carry the result forward.

Workflow steps

or unlock everything with Pro →

Airfoil Polar

open full solver →

Airfoil Lift & DragLive

the wing's polar

Controls

Presets

Angle of attack (°)

Aspect ratio

Lift rises almost linearly with angle of attack — until the airflow separates and the wing stalls, losing lift sharply. Drag has a fixed part plus induced drag that grows with lift squared and shrinks with aspect ratio. The lift-to-drag ratio, peaking at a modest angle, is the single number that governs a wing's efficiency.

▶ Run in Python

Data Inspector

Lift coeff. CL0.53

Drag coeff. CD0.033

Lift/Drag16.0

Statusattached

Governing equation

C_{D} = C_{D 0} + \frac{C _{L}^{2}}{π A R e} = 0.020 + \frac{0.5 3 ^{2}}{π \cdot 8 \cdot 0.85} = 0.033

Reading this result: Pre-stall: lift rises almost linearly with angle of attack at 6°, well below the ~15° stall angle. Adding camber would lift the entire curve higher.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Base Shear

open full solver →

Seismic Base ShearLive

equivalent lateral force

Controls

Presets

Number of stories

Weight per floor (kN)

Design accel. SDS (g)

Response factor R

Importance factor I

The equivalent lateral force method estimates the total earthquake base shear as V = Cs·W, where the seismic coefficient Cs scales the design acceleration by the structure's ductility (R) and importance (I). The base shear is distributed up the building, concentrating force at the top. Educational tool, not a code design.

▶ Run in Python

Data Inspector

Seismic coeff. Cs0.150

Total weight W9,000 kN

Base shear V1350 kN

Roof force386 kN

Governing equation

V = C_{s} W = min (\frac{S _{D S} I}{R}, 0.15) W = 0.150 \times 9, 000 = 1350 kN

Reading this result: Cs would be 0.167 but is capped at 0.15, so base shear is code-floored here — cutting R further will not add demand.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Beam Deflection

open full solver →

Beam Deflection & BendingLive

Euler-Bernoulli beam theory

Controls

Presets

Span L (m)

Load P (kN)

Flexural rigidity EI (kN·m²)

Euler-Bernoulli theory relates a beam's deflection and internal moment to its load, span, and flexural rigidity EI. Deflection grows with the cube or fourth power of span, which is why doubling a span is far worse than doubling the load. Educational tool — not a substitute for a stamped structural design.

▶ Run in Python

Data Inspector

Max deflection1.30 mm

Max moment12.5 kN·m

Span/deflectionL/3840

Governing equation

δ = \frac{P L ^{3}}{48 E I} = \frac{10 \cdot 5 ^{3}}{48 \cdot 20000} = 1.30 mm

Reading this result: At L/3840 this beam clears the usual L/360 serviceability limit, so strength (not deflection) is likely to govern the design.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

Need a private, branded version?

We build custom solvers and workflows for labs, firms, agencies, and courses — your parameters, your branding, your data.

Explore Custom Solver Sets →

More in the Structural & Geotechnical pack

Bridge Designer Multi-Story Frame Steel Connection Designer Roof Truss Analyzer Crane Boom Check Pedestrian Bridge Vibration Reinforced Slab Designer Cantilever Balcony

Frequently asked questions

What is the Wind Load Package multi-solver?: Wind Load Package is a guided workflow that chains 3 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.
Is it free to use?: Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.