Is this good for hobbyists & makers?

Yes — this version of "Seismic Base Shear for a billboard support" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.

Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Seismic Base Shear

Seismic Base Shear for a billboard support

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a billboard support live below — adjust the inputs and watch it respond, right in your browser.

Seismic Base ShearLive

equivalent lateral force

Controls

Presets

Number of stories

Weight per floor (kN)

Design accel. SDS (g)

Response factor R

Importance factor I

The equivalent lateral force method estimates the total earthquake base shear as V = Cs·W, where the seismic coefficient Cs scales the design acceleration by the structure's ductility (R) and importance (I). The base shear is distributed up the building, concentrating force at the top. Educational tool, not a code design.

▶ Run in Python

Data Inspector

Seismic coeff. Cs0.150

Total weight W9,000 kN

Base shear V1350 kN

Roof force386 kN

Governing equation

V = C_{s} W = min (\frac{S _{D S} I}{R}, 0.15) W = 0.150 \times 9, 000 = 1350 kN

Reading this result: Cs would be 0.167 but is capped at 0.15, so base shear is code-floored here — cutting R further will not add demand.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Seismic Base Shear

Seismic Base Shear for a cantilever balcony Seismic Base Shear for a bridge girder Seismic Base Shear for a floor joist Seismic Base Shear for a roof rafter Seismic Base Shear for a steel beam Seismic Base Shear for a timber deck Seismic Base Shear for a crane boom Seismic Base Shear for a retaining wall

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Seismic Base Shear for a billboard support" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.