Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Composite Designer

Composite Designer for a combustion

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a combustion live below — adjust the inputs and watch it respond, right in your browser.

Stress Strain

open full solver →

Stress-Strain CurveLive

tensile testing

Controls

Presets

Applied strain

Pull on a material and its stress-strain curve tells its story: a straight elastic region with slope equal to Young's modulus, a yield point where permanent deformation begins, a peak at the ultimate tensile strength, and finally fracture. Ductile metals stretch far; brittle ones like cast iron snap with almost no warning.

▶ Run in Python

Data Inspector

Young's modulus200 GPa

Current stress294 MPa

UTS400 MPa

Regionplastic

Governing equation

σ = E ε, E = 200 GPa, ε = 0.050, σ \approx 294 MPa

Reading this result: Past yield (250 MPa): Mild steel is deforming permanently and hardening toward its 400 MPa ultimate strength.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Mohrs Circle

open full solver →

Mohr's CircleLive

2D stress transformation

Controls

Presets

σx (MPa)

σy (MPa)

τxy (MPa)

Mohr's circle is a graphical way to transform a 2D stress state to any rotated axis. The circle's center is the average normal stress and its radius is the maximum shear. Where it crosses the horizontal axis gives the principal stresses — the orientation with zero shear. Educational tool.

▶ Run in Python

Data Inspector

σ₁ (max principal)92.4 MPa

σ₂ (min principal)7.6 MPa

τmax42.4 MPa

Principal angle22.5°

Governing equation

σ_{1, 2} = \frac{80 + 20}{2} \pm (\frac{80 - 20}{2})^{2} + 3 0^{2} = 92.4, 7.6 MPa

Reading this result: The circle radius sets τmax = 42.4 MPa on planes 45° from the principals; rotate the element by 22.5° to reach the shear-free principal orientation.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Composite Designer

Composite Designer for a reaction rate Composite Designer for a titration Composite Designer for a gas law Composite Designer for a pH balance Composite Designer for an equilibrium Composite Designer for a battery cell Composite Designer for a crystallization Composite Designer for a fermentation

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Composite Designer for a combustion" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.