For Hobbyists & Makers · Concrete Beam
Concrete Beam for a wind-turbine tower
Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a wind-turbine tower live below — adjust the inputs and watch it respond, right in your browser.
Reinforced Concrete BeamLive
flexural capacity (ACI)
Controls
Presets
A reinforced concrete beam resists bending through a compression block in the concrete and tension in the steel. Setting these forces equal gives the stress-block depth a, and the moment capacity Mn = As·fy·(d − a/2). A tension-controlled section (steel yields first) fails gradually — the ductile behavior codes require. Educational tool, not a design.
Data Inspector
Stress block a82 mm
Nominal Mn289 kN·m
Design φMn260 kN·m
Behaviortension-controlled
Governing equation
Reading this result: Tension-controlled: with ρ ≈ 0.0100 well under 0.75·ρ_bal the steel yields first and the beam warns before it fails, while Mn = As·fy·(d − a/2) rises almost linearly with steel here.
Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.
More with Concrete Beam
Frequently asked questions
- Is this good for hobbyists & makers?
- Yes — this version of "Concrete Beam for a wind-turbine tower" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
- Do I need to install anything?
- No. It runs in any modern browser, free, with no account required.