Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For K-12 Students · DSP Pipeline

DSP Pipeline for a humanoid gait

Built for k-12 students learning it in middle or high school. Watch the idea come alive with plain-language steps and everyday examples — perfect for projects and homework. Simulate a humanoid gait live below — adjust the inputs and watch it respond, right in your browser.

Aliasing

open full solver →

Sampling & AliasingLive

the Nyquist theorem

Controls

Presets

Signal frequency (Hz)

Sample rate (Hz)

To capture a signal faithfully you must sample above twice its highest frequency — the Nyquist rate. Sample too slowly and a high frequency masquerades as a lower one: aliasing. Push the signal frequency above half the sample rate and watch the reconstructed wave collapse to a false, slower tone.

▶ Run in Python

Data Inspector

Nyquist frequency10.0 Hz

Statusproperly sampled

Apparent frequency3.0 Hz

Governing equation

f_{app} = f - f_{s} round (\frac{f}{f _{s}}) = 3.0 Hz, f_{N} = \frac{f _{s}}{2} = 10.0 Hz

Reading this result: Sampling at 20 Hz puts the Nyquist limit at 10.0 Hz. The 3 Hz signal sits below that, so it is captured faithfully and reconstructs at its true frequency.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

FFT

open full solver →

Fourier Transform (FFT)Live

decompose a signal into frequencies

Controls

Build a signal from a few sine tones plus noise, and the discrete Fourier transform recovers exactly which frequencies are present — the foundation of all signal processing.

Presets

Tone 1 frequency

Tone 2 frequency

Tone 3 frequency

Noise

▶ Run in Python

Data Inspector

Samples256

Peaks at4, 9

TransformDFT

Governing equation

X_{k} = n = 0 \sum N - 1 x_{n} e^{- 2 π ik n / N} (N = 256, O (N lo g N))

Reading this result: The FFT splits this 2-tone signal into bins: each input sinusoid at 4, 9 appears as a distinct spike, and with noise at 0 the baseline between them stays clean.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Filter Designer

open full solver →

Analog Filter DesignerLive

RC & RLC frequency response

Controls

Presets

Resistance R (Ω)

Capacitance C (nF)

Passive filters shape a signal's frequency content with resistors, capacitors, and inductors. An RC low-pass or high-pass has a cutoff at 1/(2πRC) where the response drops 3 dB; an RLC bandpass resonates at 1/(2π√(LC)) with sharpness set by its quality factor Q.

▶ Run in Python

Data Inspector

Cutoff fc1.6 kHz

Resonance f₀5.0 kHz

Quality factor Q0.32

Governing equation

∣ H (f) ∣ = \frac{1}{1 + ( f /1592 ) ^{2}}

Reading this result: Low-pass: signals below the 1.6 kHz corner pass, above it they roll off at 20 dB/decade, and the response is exactly 3 dB down right at the corner.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers Hobbyists & Makers First Responders General version →

More with DSP Pipeline

DSP Pipeline for a robot arm DSP Pipeline for a self-driving car DSP Pipeline for a warehouse robot DSP Pipeline for a drone delivery DSP Pipeline for a walking robot DSP Pipeline for a robotic gripper DSP Pipeline for a CNC toolpath DSP Pipeline for a quadruped

Frequently asked questions

Is this good for k-12 students?: Yes — this version of "DSP Pipeline for a humanoid gait" is framed for k-12 students learning it in middle or high school. Watch the idea come alive with plain-language steps and everyday examples — perfect for projects and homework.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.