How do I simulate a relay?

Open this page and use the live EMI Filter tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a relay from your own measurements.

Use case · powered by EMI Filter

EMI Filter for a relay

Simulate a relay live in your browser. This runs the real EMI Filter solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Filter Designer

open full solver →

Analog Filter DesignerLive

RC & RLC frequency response

Controls

Presets

Resistance R (Ω)

Capacitance C (nF)

Passive filters shape a signal's frequency content with resistors, capacitors, and inductors. An RC low-pass or high-pass has a cutoff at 1/(2πRC) where the response drops 3 dB; an RLC bandpass resonates at 1/(2π√(LC)) with sharpness set by its quality factor Q.

▶ Run in Python

Data Inspector

Cutoff fc1.6 kHz

Resonance f₀5.0 kHz

Quality factor Q0.32

Governing equation

∣ H (f) ∣ = \frac{1}{1 + ( f /1592 ) ^{2}}

Reading this result: Low-pass: signals below the 1.6 kHz corner pass, above it they roll off at 20 dB/decade, and the response is exactly 3 dB down right at the corner.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Bode Plot

open full solver →

Bode Plot (2nd-Order System)Live

frequency response

Controls

Presets

Natural frequency (Hz)

Damping ratio ζ

A Bode plot shows how a system responds across frequency: gain in decibels on top, phase shift below. This second-order low-pass passes low frequencies and rolls off at −40 dB/decade above its natural frequency. Low damping produces a resonant peak; high damping smooths it away.

▶ Run in Python

Data Inspector

Natural freq1,000 Hz

Damping ζ0.30

Resonant peak+4.8 dB

Roll-off−40 dB/dec

Governing equation

H (s) = \frac{ω _{n}^{2}}{s ^{2} + 2 ζ ω _{n} s + ω _{n}^{2}} = \frac{6 , 28 3 ^{2}}{s ^{2} + 3770 s + 6 , 28 3 ^{2}}

Reading this result: Low damping ζ=0.30 produces a sharp +4.8 dB resonant peak just below fn — great for selectivity, but it rings in the time domain.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full EMI Filter tool models a relay with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with EMI Filter

EMI Filter for an RLC circuit EMI Filter for a power supply EMI Filter for a transformer EMI Filter for a DC motor EMI Filter for an op-amp filter EMI Filter for an antenna EMI Filter for a transmission line EMI Filter for a PCB trace

Other ways to simulate a relay

Fourier Transform for a relay Bode Plot for a relay Filter Designer for a relay PID Controller for a relay Transmission Line for a relay Op-Amp Circuits for a relay

Frequently asked questions

How do I simulate a relay?: Open this page and use the live EMI Filter tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a relay from your own measurements.