Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Educators · Fin Cooling

Fin Cooling for a wind-turbine tower

Built for educators teaching it to a class. Drop a live demo into a lecture or assign it as a shareable link — no lab installs. Simulate a wind-turbine tower live below — adjust the inputs and watch it respond, right in your browser.

Fin CoolingLive

heat sinks & extended surfaces

Controls

Presets

Conductivity k (W/m·K)

Convection h (W/m²·K)

Fin thickness (m)

Fin length (m)

Base temp (°C)

A fin extends a hot surface into the air to shed more heat. Temperature falls along it as θ(x)/θ_b = cosh(m(L−x))/cosh(mL). Long, thin, low-conductivity fins run cool at the tip — wasted area, captured by the fin efficiency. Educational tool.

▶ Run in Python

Data Inspector

Tip temperature86.7 °C

Fin efficiency88%

Heat dissipated330.3 W

Governing equation

\frac{θ}{θ _{b}} = \frac{cosh ( 12.9 ( 0.05 - x ))}{cosh ( 0.65 )}, m = \frac{2 h}{k t}

Reading this result: Balanced fin (mL=0.65): a practical compromise at 88% efficiency, with the tip still 62 °C above ambient.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Engineers Hobbyists & Makers K-12 Students First Responders General version →

More with Fin Cooling

Fin Cooling for a cantilever balcony Fin Cooling for a bridge girder Fin Cooling for a floor joist Fin Cooling for a roof rafter Fin Cooling for a steel beam Fin Cooling for a timber deck Fin Cooling for a crane boom Fin Cooling for a retaining wall

Frequently asked questions

Is this good for educators?: Yes — this version of "Fin Cooling for a wind-turbine tower" is framed for educators teaching it to a class. Drop a live demo into a lecture or assign it as a shareable link — no lab installs.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.