Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Gear Train Ratios

Gear Train Ratios for a steel beam

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a steel beam live below — adjust the inputs and watch it respond, right in your browser.

Gear Train RatiosLive

trade speed for torque

Controls

Presets

Driver teeth

Driven teeth

Input speed (rpm)

Input torque (N·m)

A larger driven gear turns slower but with proportionally more torque — the ratio equals the tooth-count ratio. Gears trade speed for force, exactly like a lever.

▶ Run in Python

Data Inspector

Gear ratio3.00 : 1

Output speed20.0 rpm

Output torque6.0 N·m

Governing equation

\frac{ω _{o u t}}{ω _{in}} = - \frac{N _{in}}{N _{o u t}} = - \frac{12}{36}, τ_{o u t} = τ_{in} \cdot \frac{N _{o u t}}{N _{in}} = 6.0 N\cdotm

Reading this result: Reduction drive: the driven gear turns 3.0× slower but multiplies torque 3.0× — trading speed for pulling force, like low gear on a bike.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Gear Train Ratios

Gear Train Ratios for a cantilever balcony Gear Train Ratios for a bridge girder Gear Train Ratios for a floor joist Gear Train Ratios for a roof rafter Gear Train Ratios for a timber deck Gear Train Ratios for a crane boom Gear Train Ratios for a retaining wall Gear Train Ratios for a stair stringer

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Gear Train Ratios for a steel beam" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.