How do I simulate a CO2 rise?

Open this page and use the live Hazmat Incident Kit tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a CO2 rise from your own measurements.

Use case · powered by Hazmat Incident Kit

Hazmat Incident Kit for a CO2 rise

Simulate a CO2 rise live in your browser. This runs the real Hazmat Incident Kit solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Hazmat Plume

open full solver →

Hazmat Plume DispersionLive

Gaussian plume · protective action

Controls

Presets

Release rate (g/s)

Wind speed (m/s)

Action level (mg/m³)

A Gaussian plume estimates how a gas or vapor release disperses downwind. Stability class (A unstable to F stable) sets how fast the plume spreads. The dashed line is the protective action distance where concentration falls below your action level. Screening estimate only — use ERG and monitors on scene.

▶ Run in Python

Data Inspector

Protective distance>20 km

StabilityD neutral

Wind4 m/s

Governing equation

C (x, y) = \frac{50}{2 π 4 σ _{y} σ _{z}} exp (- \frac{y ^{2}}{2 σ _{y}^{2}})

Reading this result: Concentration falls off as the wind stretches and vertical mixing thins the plume — stronger wind and less stable air pull the protective distance in toward the source.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Triage

open full solver →

START TriageLive

mass-casualty triage algorithm

Triage category

YELLOW

Delayed

Controls

Can the patient walk?

Is the patient breathing?

Presets

Respirations / min

24 /min

Perfusion (radial pulse / cap refill <2s)

Mental status (obeys commands)

Simple Triage And Rapid Treatment sorts mass-casualty patients in under 60 seconds each using RPM: Respirations, Perfusion, Mental status. Training reference only — follow your agency protocol and medical direction.

▶ Run in Python

Data Inspector

RR trigger>30/min

Perfusioncap refill 2s

StandardSTART adult

Triage criterion

RR = 24 \leq 30 \Rightarrow not RED by RR

Reading this result: RPM checks pass (RR 24/min, perfusion adequate, follows commands), so the patient is DELAYED (YELLOW).

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Hazmat Incident Kit tool models a CO2 rise with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Hazmat Incident Kit

Hazmat Incident Kit for an earthquake Hazmat Incident Kit for a volcano Hazmat Incident Kit for a glacier melt Hazmat Incident Kit for a tsunami Hazmat Incident Kit for a river flood Hazmat Incident Kit for an ocean current Hazmat Incident Kit for a sea-level rise Hazmat Incident Kit for a carbon cycle

Other ways to simulate a CO2 rise

Energy Balance for a CO2 rise Daisyworld for a CO2 rise Milankovitch Cycles for a CO2 rise Tsunami Propagation for a CO2 rise Carbon Cycle for a CO2 rise Earthquake Shaking for a CO2 rise

Frequently asked questions

How do I simulate a CO2 rise?: Open this page and use the live Hazmat Incident Kit tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a CO2 rise from your own measurements.