Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Insulation Optimizer

Insulation Optimizer for a fuel cell

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a fuel cell live below — adjust the inputs and watch it respond, right in your browser.

Thermal Resistance

open full solver →

Composite Wall Heat TransferLive

R-value & U-value

Controls

Presets

Drywall (mm)

Insulation (mm)

Brick (mm)

Inside temp (°C)

Outside temp (°C)

Heat flows through a wall like current through resistors in series. Each layer's thermal resistance is its thickness over its conductivity; adding them gives the total R-value, and the heat flux is the temperature difference divided by it. Insulation, with very low conductivity, dominates the R-value — the steep temperature drop shows where it does its work.

▶ Run in Python

Data Inspector

Total R-value2.71 m²K/W

U-value0.37 W/m²K

Heat flux9.6 W/m²

Governing equation

R = \sum \frac{L _{i}}{k _{i} A} = 2.71 \frac{m ^{2} K}{W}, Q = \frac{Δ T}{R} = 9.6 \frac{W}{m ^{2}}

Reading this result: The insulation layer carries the most thermal resistance, so the temperature falls most steeply across it. A total R-value of 2.71 m²K/W lets 9.6 W/m² flow for this 26°C difference.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Carbon Footprint

open full solver →

Carbon FootprintLive

your annual CO₂ in tonnes

8.7

tonnes CO₂ per year

Electricity

1.9 t

Driving

2.3 t

Flights

2.0 t

Diet

2.5 t

Controls

Presets

Electricity (kWh/month)

Driving (km/year)

Flights (short-haul/yr)

Diet

Your carbon footprint is the sum of the greenhouse gases your lifestyle emits each year. The big levers are usually flying, driving, home energy, and diet. The global average is about 4.7 tonnes per person, but a livable-planet target is closer to 2 tonnes. Estimates use typical emission factors and will vary by region.

▶ Run in Python

Data Inspector

Total footprint8.7 t CO₂/yr

vs global avg1.8×

vs 2t target4.3× over

Governing equation

E_{t o t a l} = i \sum a_{i} f_{i} = 1.9 + 2.3 + 2.0 + 2.5 = 8.7 t CO_{2} /yr

Reading this result: Diet is your single biggest slice at 2.5 t of the 8.7 t total, so that is where a cut moves the needle most — one long-haul flight can outweigh a whole year of driving.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Insulation Optimizer

Insulation Optimizer for a solar farm Insulation Optimizer for a wind turbine Insulation Optimizer for a home battery Insulation Optimizer for an EV charger Insulation Optimizer for a power grid Insulation Optimizer for a heat pump Insulation Optimizer for a gas turbine Insulation Optimizer for a hydro dam

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Insulation Optimizer for a fuel cell" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.