Is this good for hobbyists & makers?

Yes — this version of "Liquefaction Assessment for a scaffold tower" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.

Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Liquefaction Assessment

Liquefaction Assessment for a scaffold tower

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a scaffold tower live below — adjust the inputs and watch it respond, right in your browser.

Seismic

open full solver →

Earthquake Magnitude & ShakingLive

energy · attenuation · intensity

Controls

Presets

Moment magnitude Mw

Distance from epicenter (km)

Magnitude is logarithmic in amplitude but each unit releases about 32× more energy (E ∝ 10^1.5M). Shaking at a site falls off with distance through attenuation. Peak ground acceleration maps to the Modified Mercalli intensity people actually feel — a planning estimate, not a site-specific hazard analysis.

▶ Run in Python

Data Inspector

Energy6.31e+13 J

TNT equivalent15.1 kt

Peak accel.0.3 %g

IntensityIII-IV Light

Governing equation

lo g_{10} E = 1.5 M + 4.8 = 13.8 (M = 6.0)

Reading this result: 30 km out, an M6 quake attenuates to only ~0.3%g — intensity III-IV Light, felt but rarely damaging. Distance and the log falloff tame most of the 6.3e+13 J released.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Soil Bearing

open full solver →

Soil Bearing Capacity (Terzaghi)Live

foundation design

Allowable bearing pressure

400kPa

Allowable load ≈ 801 kN per metre of footing

Controls

Presets

Cohesion c (kPa)

Friction angle φ (°)

Unit weight γ (kN/m³)

Footing width B (m)

Embedment depth (m)

Factor of safety

Terzaghi's equation predicts the ultimate bearing capacity of a shallow footing as the sum of cohesion, surcharge, and self-weight terms, each with a bearing-capacity factor that grows sharply with the soil friction angle. Dividing by a factor of safety gives the allowable pressure. Educational tool, not a geotechnical design.

▶ Run in Python

Data Inspector

Nc30.1

Nq18.4

Nγ22.4

Ultimate qult1201 kPa

Governing equation

q_{u} = c N_{c} + γ D_{f} N_{q} + \frac{1}{2} γ B N_{γ} = 10 (30.1) + 27 (18.4) + \frac{1}{2} (18) (2) (22.4) = 1201 kPa

Reading this result: Mixed c-φ soil: all three terms contribute — deeper embedment and a wider footing both push the ultimate capacity higher.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Liquefaction Assessment

Liquefaction Assessment for a cantilever balcony Liquefaction Assessment for a bridge girder Liquefaction Assessment for a floor joist Liquefaction Assessment for a roof rafter Liquefaction Assessment for a steel beam Liquefaction Assessment for a timber deck Liquefaction Assessment for a crane boom Liquefaction Assessment for a retaining wall

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Liquefaction Assessment for a scaffold tower" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.