Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For First Responders · Machining Parameters

Machining Parameters for an acid-base reaction

Built for first responders planning or training for real incidents. Run fast what-if scenarios for response planning and training — no software to install in the field. Simulate an acid-base reaction live below — adjust the inputs and watch it respond, right in your browser.

CNC Feeds & Speeds

open full solver →

CNC Feeds & SpeedsLive

cutting parameters

9549

spindle RPM

1910

feed mm/min

Aluminum · ⌀10mm · 4 flutes

Controls

Presets

Tool diameter (mm)

Number of teeth

Feed per tooth (mm)

Depth of cut (mm)

Machining a part right means matching spindle speed and feed to the material. The cutting speed (surface meters per minute) sets the RPM for a given tool diameter; the feed rate is RPM times chip load per tooth times the number of teeth. Too fast burns the tool; too slow rubs and work-hardens. The material removal rate is your productivity.

▶ Run in Python

Data Inspector

Spindle speed9549 RPM

Feed rate1910 mm/min

Cutting speed300 m/min

Material removal38.2 cm³/min

Governing equation

n = \frac{1000 V _{c}}{π D} = \frac{1000 \cdot 300}{π \cdot 10} = 9549 rpm, v_{f} = n z f_{z} = 1910 \frac{mm}{min}

Reading this result: Feed rate is RPM times chip load times flute count, so adding flutes or feed lifts throughput here to about 38.2 cm³/min without changing the surface speed.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students General version →

More with Machining Parameters

Machining Parameters for a reaction rate Machining Parameters for a titration Machining Parameters for a gas law Machining Parameters for a pH balance Machining Parameters for an equilibrium Machining Parameters for a battery cell Machining Parameters for a combustion Machining Parameters for a crystallization

Frequently asked questions

Is this good for first responders?: Yes — this version of "Machining Parameters for an acid-base reaction" is framed for first responders planning or training for real incidents. Run fast what-if scenarios for response planning and training — no software to install in the field.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.