How do I simulate a buck converter?

Open this page and use the live Oscillator Designer tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a buck converter from your own measurements.

Use case · powered by Oscillator Designer

Oscillator Designer for a buck converter

Simulate a buck converter live in your browser. This runs the real Oscillator Designer solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

RLC Circuit

open full solver →

RLC Circuit StudioLive

series RLC step response

Controls

Apply a step voltage to a series RLC circuit and watch charge and current respond — under-, over-, or critically damped.

Presets

Resistance R

Inductance L

Capacitance C

▶ Run in Python

Data Inspector

Damping ζ0.750

Regimeunderdamped

ω₀1.000

Governing equation

1 \overset{q}{¨} + 1.5 \overset{q}{˙} + \frac{q}{1} = V_{0}, ω_{0} = \frac{1}{L C} = 1.000, ζ = \frac{R}{2} \frac{C}{L} = 0.750

Reading this result: ζ = 0.750 < 1: underdamped. With ω₀ = 1.000 rad/s the charge overshoots and rings, oscillating while it decays toward its steady value. Lower ζ means more ringing.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Bode Plot

open full solver →

Bode Plot (2nd-Order System)Live

frequency response

Controls

Presets

Natural frequency (Hz)

Damping ratio ζ

A Bode plot shows how a system responds across frequency: gain in decibels on top, phase shift below. This second-order low-pass passes low frequencies and rolls off at −40 dB/decade above its natural frequency. Low damping produces a resonant peak; high damping smooths it away.

▶ Run in Python

Data Inspector

Natural freq1,000 Hz

Damping ζ0.30

Resonant peak+4.8 dB

Roll-off−40 dB/dec

Governing equation

H (s) = \frac{ω _{n}^{2}}{s ^{2} + 2 ζ ω _{n} s + ω _{n}^{2}} = \frac{6 , 28 3 ^{2}}{s ^{2} + 3770 s + 6 , 28 3 ^{2}}

Reading this result: Low damping ζ=0.30 produces a sharp +4.8 dB resonant peak just below fn — great for selectivity, but it rings in the time domain.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Oscillator Designer tool models a buck converter with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Oscillator Designer

Oscillator Designer for an RLC circuit Oscillator Designer for a power supply Oscillator Designer for a transformer Oscillator Designer for a DC motor Oscillator Designer for an op-amp filter Oscillator Designer for an antenna Oscillator Designer for a transmission line Oscillator Designer for a PCB trace

Other ways to simulate a buck converter

Fourier Transform for a buck converter Bode Plot for a buck converter Filter Designer for a buck converter PID Controller for a buck converter Transmission Line for a buck converter Op-Amp Circuits for a buck converter

Frequently asked questions

How do I simulate a buck converter?: Open this page and use the live Oscillator Designer tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a buck converter from your own measurements.