Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Engineers · Pile Foundation

Pile Foundation for a carport roof

Built for engineers using it for real design work. Go from concept to a running model in the browser, then scale to the cloud when needed. Simulate a carport roof live below — adjust the inputs and watch it respond, right in your browser.

Soil Bearing

open full solver →

Soil Bearing Capacity (Terzaghi)Live

foundation design

Allowable bearing pressure

400kPa

Allowable load ≈ 801 kN per metre of footing

Controls

Presets

Cohesion c (kPa)

Friction angle φ (°)

Unit weight γ (kN/m³)

Footing width B (m)

Embedment depth (m)

Factor of safety

Terzaghi's equation predicts the ultimate bearing capacity of a shallow footing as the sum of cohesion, surcharge, and self-weight terms, each with a bearing-capacity factor that grows sharply with the soil friction angle. Dividing by a factor of safety gives the allowable pressure. Educational tool, not a geotechnical design.

▶ Run in Python

Data Inspector

Nc30.1

Nq18.4

Nγ22.4

Ultimate qult1201 kPa

Governing equation

q_{u} = c N_{c} + γ D_{f} N_{q} + \frac{1}{2} γ B N_{γ} = 10 (30.1) + 27 (18.4) + \frac{1}{2} (18) (2) (22.4) = 1201 kPa

Reading this result: Mixed c-φ soil: all three terms contribute — deeper embedment and a wider footing both push the ultimate capacity higher.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Beam Deflection

open full solver →

Beam Deflection & BendingLive

Euler-Bernoulli beam theory

Controls

Presets

Span L (m)

Load P (kN)

Flexural rigidity EI (kN·m²)

Euler-Bernoulli theory relates a beam's deflection and internal moment to its load, span, and flexural rigidity EI. Deflection grows with the cube or fourth power of span, which is why doubling a span is far worse than doubling the load. Educational tool — not a substitute for a stamped structural design.

▶ Run in Python

Data Inspector

Max deflection1.30 mm

Max moment12.5 kN·m

Span/deflectionL/3840

Governing equation

δ = \frac{P L ^{3}}{48 E I} = \frac{10 \cdot 5 ^{3}}{48 \cdot 20000} = 1.30 mm

Reading this result: At L/3840 this beam clears the usual L/360 serviceability limit, so strength (not deflection) is likely to govern the design.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Hobbyists & Makers K-12 Students First Responders General version →

More with Pile Foundation

Pile Foundation for a cantilever balcony Pile Foundation for a bridge girder Pile Foundation for a floor joist Pile Foundation for a roof rafter Pile Foundation for a steel beam Pile Foundation for a timber deck Pile Foundation for a crane boom Pile Foundation for a retaining wall

Frequently asked questions

Is this good for engineers?: Yes — this version of "Pile Foundation for a carport roof" is framed for engineers using it for real design work. Go from concept to a running model in the browser, then scale to the cloud when needed.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.