How do I simulate a transmission line?

Open this page and use the live Pump & Piping System tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a transmission line from your own measurements.

Use case · powered by Pump & Piping System

Pump & Piping System for a transmission line

Simulate a transmission line live in your browser. This runs the real Pump & Piping System solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Fluid

open full solver →

2D Fluid (CFD) StudioLive

Stam stable-fluids · Navier–Stokes

Controls

Speed1×

Click and drag on the canvas to inject dye and velocity.

Presets

Viscosity

Injection force

Dye amount

▶ Run in Python

Data Inspector

Grid96×96

Total dye0

Mean speed0.000

Max speed0.000

Enstrophy0.00e+0

Governing equation

\frac{\partial u}{\partial t} + (u \cdot \nabla) u = - \frac{\nabla p}{ρ} + 1.0 e - 7 \nabla^{2} u, \nabla \cdot u = 0

Reading this result: Near-zero viscosity: momentum barely dissipates, so vortices persist and the flow tips into turbulent, chaotic mixing.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Buoyancy

open full solver →

Buoyancy & ArchimedesLive

floating equilibrium by density

Controls

An object floats with exactly the fraction ρ_object/ρ_fluid submerged. Denser than the fluid? It sinks. This is Archimedes' principle, live.

Presets

Object density (kg/m³)

Fluid density (kg/m³)

Object size

▶ Run in Python

Data Inspector

Fraction submerged60%

Statefloats

ρ ratio0.60

Governing equation

\frac{V _{s u b}}{V} = \frac{ρ _{o bj}}{ρ _{f l u i d}} = \frac{600}{1000} = 0.60 F_{b} = ρ_{f l u i d} g V

Reading this result: Lighter than the fluid (ρ ratio 0.60), so it floats with exactly 60% submerged — the submerged fraction equals the density ratio, and object size never changes it.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Pump & Piping System tool models a transmission line with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Pump & Piping System

Pump & Piping System for a solar farm Pump & Piping System for a wind turbine Pump & Piping System for a home battery Pump & Piping System for an EV charger Pump & Piping System for a power grid Pump & Piping System for a heat pump Pump & Piping System for a gas turbine Pump & Piping System for a hydro dam

Other ways to simulate a transmission line

Fourier Transform for a transmission line Bode Plot for a transmission line Filter Designer for a transmission line PID Controller for a transmission line Transmission Line for a transmission line Op-Amp Circuits for a transmission line

Frequently asked questions

How do I simulate a transmission line?: Open this page and use the live Pump & Piping System tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a transmission line from your own measurements.