Is this good for hobbyists & makers?

Yes — this version of "Retaining Wall for a cantilever balcony" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.

Do I need to install anything?

No. It runs in any modern browser, free, with no account required.

For Hobbyists & Makers · Retaining Wall

Retaining Wall for a cantilever balcony

Built for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker. Simulate a cantilever balcony live below — adjust the inputs and watch it respond, right in your browser.

Retaining Wall (Rankine)Live

earth pressure & stability

Controls

Presets

Wall height H (m)

Soil friction angle φ (°)

Soil unit weight γ (kN/m³)

Base width (m)

Rankine theory gives the active earth pressure behind a wall from the coefficient Ka = tan²(45−φ/2). The soil pushes with a triangular pressure resultant Pa acting at one-third the height. The wall must resist overturning and sliding with adequate factors of safety. Educational tool, not a geotechnical design.

▶ Run in Python

Data Inspector

Ka0.333

Active thrust Pa48.0 kN/m

FS overturning1.82

FS sliding0.81

Governing equation

K_{a} = tan^{2} (45 - \frac{φ}{2}) = 0.333, P_{a} = \frac{1}{2} K_{a} γ H^{2} = 48.0 kN/m

Reading this result: Sliding FS is 0.81, under the ~1.5 target — the wall could slide out. A wider base or a shear key would help.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

Also for:Students Researchers Educators Engineers K-12 Students First Responders General version →

More with Retaining Wall

Retaining Wall for a bridge girder Retaining Wall for a floor joist Retaining Wall for a roof rafter Retaining Wall for a steel beam Retaining Wall for a timber deck Retaining Wall for a crane boom Retaining Wall for a retaining wall Retaining Wall for a stair stringer

Frequently asked questions

Is this good for hobbyists & makers?: Yes — this version of "Retaining Wall for a cantilever balcony" is framed for hobbyists & makers exploring it for fun. Play with real physics and math, no license and no setup — just open and tinker.
Do I need to install anything?: No. It runs in any modern browser, free, with no account required.