PPolySim OS
Use case · powered by Room Modes

Room Modes for a concert hall

Simulate a concert hall live in your browser. This runs the real Room Modes solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

Room Acoustic ModesLive

Controls

Presets

A room resonates at frequencies where sound waves fit exactly between its surfaces. These modes — axial between two walls, tangential among four, oblique among all six — cause the boomy bass and dead spots in small rooms. Even spacing sounds smooth; clustered modes cause problems. Cube-shaped rooms are the worst.

▶ Run in Python

Data Inspector

Lowest mode34.3 Hz
Modes < 200 Hz67
Volume56 m³

Governing equation

Reading this result: The lowest mode is 34.3 Hz and 67 modes fall below 200 Hz; aim for even spacing between them to avoid boomy peaks and dead spots.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Room Modes tool models a concert hall with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Room Modes

Other ways to simulate a concert hall

Frequently asked questions

How do I simulate a concert hall?
Open this page and use the live Room Modes tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?
Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?
Absolutely — every input is adjustable, and with data import you can drive a concert hall from your own measurements.