How do I simulate a tectonic plate?

Open this page and use the live Solar & Wind Site tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a tectonic plate from your own measurements.

Use case · powered by Solar & Wind Site

Solar & Wind Site for a tectonic plate

Simulate a tectonic plate live in your browser. This runs the real Solar & Wind Site solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Solar Panel

open full solver →

Solar PV SystemLive

panels to kilowatt-hours

Controls

Presets

Panel area (m²)

Panel efficiency (%)

Peak sun hours/day

Tilt angle (°)

A solar array's output is its rated power (area × efficiency at 1000 W/m²) multiplied by the peak sun hours your location receives — the equivalent full-intensity hours per day. Tilt matters too: aiming the panels near your latitude maximizes annual yield. Real systems lose a bit more to heat, wiring, and inverters.

▶ Run in Python

Data Inspector

System rating4.0 kW

Daily energy19.2 kWh

Annual energy6996 kWh

Homes powered0.7

Governing equation

P = η A G = 0.20 \times 20 \times 1000 = 4000 W

Reading this result: A 4.0 kW array in 5-sun-hour sun yields about 19.2 kWh/day — roughly 0.7 average homes.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Wind Power

open full solver →

Wind Turbine PowerLive

the Betz limit

Controls

Presets

Rotor diameter (m)

Wind speed (m/s)

Power coefficient Cp

Wind power scales with the cube of wind speed and the square of rotor diameter — which is why turbines keep getting bigger and why a windy site is worth so much more. No turbine can extract more than 59.3% of the wind's energy (the Betz limit); real machines reach about 45%. Below cut-in and above cut-out speeds they produce nothing.

▶ Run in Python

Data Inspector

Power output1.64 MW

Rated power2.83 MW

Swept area6362 m²

% of Betz limit71%

Governing equation

P = \frac{1}{2} ρ A v^{3} C_{p} = \frac{1}{2} (1.225) (6362) (10)^{3} (0.42) = 1.64 MW

Reading this result: In the ramp region power climbs with the cube of wind speed, so even a small gust adds a large jump in output.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Solar & Wind Site tool models a tectonic plate with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Solar & Wind Site

Solar & Wind Site for an earthquake Solar & Wind Site for a volcano Solar & Wind Site for a glacier melt Solar & Wind Site for a tsunami Solar & Wind Site for a river flood Solar & Wind Site for an ocean current Solar & Wind Site for a sea-level rise Solar & Wind Site for a carbon cycle

Other ways to simulate a tectonic plate

Energy Balance for a tectonic plate Daisyworld for a tectonic plate Milankovitch Cycles for a tectonic plate Tsunami Propagation for a tectonic plate Carbon Cycle for a tectonic plate Earthquake Shaking for a tectonic plate

Frequently asked questions

How do I simulate a tectonic plate?: Open this page and use the live Solar & Wind Site tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a tectonic plate from your own measurements.