How do I simulate a floor joist?

Open this page and use the live Tunnel Support tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a floor joist from your own measurements.

Use case · powered by Tunnel Support

Tunnel Support for a floor joist

Simulate a floor joist live in your browser. This runs the real Tunnel Support solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Beam Deflection

open full solver →

Beam Deflection & BendingLive

Euler-Bernoulli beam theory

Controls

Presets

Span L (m)

Load P (kN)

Flexural rigidity EI (kN·m²)

Euler-Bernoulli theory relates a beam's deflection and internal moment to its load, span, and flexural rigidity EI. Deflection grows with the cube or fourth power of span, which is why doubling a span is far worse than doubling the load. Educational tool — not a substitute for a stamped structural design.

▶ Run in Python

Data Inspector

Max deflection1.30 mm

Max moment12.5 kN·m

Span/deflectionL/3840

Governing equation

δ = \frac{P L ^{3}}{48 E I} = \frac{10 \cdot 5 ^{3}}{48 \cdot 20000} = 1.30 mm

Reading this result: At L/3840 this beam clears the usual L/360 serviceability limit, so strength (not deflection) is likely to govern the design.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Soil Bearing

open full solver →

Soil Bearing Capacity (Terzaghi)Live

foundation design

Allowable bearing pressure

400kPa

Allowable load ≈ 801 kN per metre of footing

Controls

Presets

Cohesion c (kPa)

Friction angle φ (°)

Unit weight γ (kN/m³)

Footing width B (m)

Embedment depth (m)

Factor of safety

Terzaghi's equation predicts the ultimate bearing capacity of a shallow footing as the sum of cohesion, surcharge, and self-weight terms, each with a bearing-capacity factor that grows sharply with the soil friction angle. Dividing by a factor of safety gives the allowable pressure. Educational tool, not a geotechnical design.

▶ Run in Python

Data Inspector

Nc30.1

Nq18.4

Nγ22.4

Ultimate qult1201 kPa

Governing equation

q_{u} = c N_{c} + γ D_{f} N_{q} + \frac{1}{2} γ B N_{γ} = 10 (30.1) + 27 (18.4) + \frac{1}{2} (18) (2) (22.4) = 1201 kPa

Reading this result: Mixed c-φ soil: all three terms contribute — deeper embedment and a wider footing both push the ultimate capacity higher.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Tunnel Support tool models a floor joist with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Tunnel Support

Tunnel Support for a cantilever balcony Tunnel Support for a bridge girder Tunnel Support for a roof rafter Tunnel Support for a steel beam Tunnel Support for a timber deck Tunnel Support for a crane boom Tunnel Support for a retaining wall Tunnel Support for a stair stringer

Other ways to simulate a floor joist

2D Fluid (CFD) for a floor joist 3D CFD for a floor joist 3D FEA Space Frame for a floor joist FEA Truss for a floor joist Meshing + BCs for a floor joist RLC Circuit for a floor joist

Frequently asked questions

How do I simulate a floor joist?: Open this page and use the live Tunnel Support tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a floor joist from your own measurements.