How do I simulate a crystallization?

Open this page and use the live Weld Design tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a crystallization from your own measurements.

Use case · powered by Weld Design

Weld Design for a crystallization

Simulate a crystallization live in your browser. This runs the real Weld Design solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Thermal Expansion

open full solver →

Thermal ExpansionLive

materials grow with heat

Controls

Presets

Original length (m)

Temperature change (°C)

Heat a material and it expands: ΔL = α·L·ΔT, where α is the coefficient of linear expansion. Area grows at twice that rate and volume at three times. It is why bridges have expansion joints, why rails buckle in heat, and why Invar — with almost zero expansion — is prized for precision instruments.

▶ Run in Python

Data Inspector

α23 µm/m·°C

Length change11.5 mm

Area change0.230 m²

Volume change3.450 m³

Governing equation

Δ L = α L_{0} Δ T = (23 \times 1 0^{- 6}) (10) (50) = 11.5 mm

Reading this result: Heating 10 m of Aluminum by 50°C stretches it about 11.5 mm; area and volume grow 2× and 3× as fast.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Stress Strain

open full solver →

Stress-Strain CurveLive

tensile testing

Controls

Presets

Applied strain

Pull on a material and its stress-strain curve tells its story: a straight elastic region with slope equal to Young's modulus, a yield point where permanent deformation begins, a peak at the ultimate tensile strength, and finally fracture. Ductile metals stretch far; brittle ones like cast iron snap with almost no warning.

▶ Run in Python

Data Inspector

Young's modulus200 GPa

Current stress294 MPa

UTS400 MPa

Regionplastic

Governing equation

σ = E ε, E = 200 GPa, ε = 0.050, σ \approx 294 MPa

Reading this result: Past yield (250 MPa): Mild steel is deforming permanently and hardening toward its 400 MPa ultimate strength.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Weld Design tool models a crystallization with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Weld Design

Weld Design for a reaction rate Weld Design for a titration Weld Design for a gas law Weld Design for a pH balance Weld Design for an equilibrium Weld Design for a battery cell Weld Design for a combustion Weld Design for a fermentation

Other ways to simulate a crystallization

Molecular Dynamics for a crystallization Titration Curve for a crystallization Reaction Kinetics for a crystallization Chemical Equilibrium for a crystallization pH Calculator for a crystallization Radioactive Decay for a crystallization

Frequently asked questions

How do I simulate a crystallization?: Open this page and use the live Weld Design tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a crystallization from your own measurements.