Wind Turbine Yield for an EV charger
Simulate an EV charger live in your browser. This runs the real Wind Turbine Yield solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.
Controls
Presets
Lift rises almost linearly with angle of attack — until the airflow separates and the wing stalls, losing lift sharply. Drag has a fixed part plus induced drag that grows with lift squared and shrinks with aspect ratio. The lift-to-drag ratio, peaking at a modest angle, is the single number that governs a wing's efficiency.
Data Inspector
Governing equation
Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.
Controls
Presets
Wind power scales with the cube of wind speed and the square of rotor diameter — which is why turbines keep getting bigger and why a windy site is worth so much more. No turbine can extract more than 59.3% of the wind's energy (the Betz limit); real machines reach about 45%. Below cut-in and above cut-out speeds they produce nothing.
Data Inspector
Governing equation
Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.
Controls
Presets
LCOE spreads a power project's lifetime cost over every megawatt-hour it produces, letting wildly different technologies be compared fairly. It rewards high capacity factors and cheap capital, and punishes idle plants. The capital-recovery factor discounts future costs to today. It is the number that has made solar and wind the cheapest new power in most of the world.
Data Inspector
Governing equation
Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.
About this simulation
The full Wind Turbine Yield tool models an EV charger with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.
More you can do with Wind Turbine Yield
Other ways to simulate an EV charger
Frequently asked questions
- How do I simulate an EV charger?
- Open this page and use the live Wind Turbine Yield tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
- Is it free?
- Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
- Can I use my own numbers?
- Absolutely — every input is adjustable, and with data import you can drive an EV charger from your own measurements.