What is the Embankment Settlement multi-solver?

Embankment Settlement is a guided workflow that chains 2 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.

Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.

Structural & Geotechnical Pack · Multi-Solver

Embankment Settlement

Consolidation & stability. This multi-solver chains 2 solvers into a single guided workflow — run each step in order and carry the result forward.

Workflow steps

or unlock everything with Pro →

Soil Bearing

open full solver →

Soil Bearing Capacity (Terzaghi)Live

foundation design

Allowable bearing pressure

400kPa

Allowable load ≈ 801 kN per metre of footing

Controls

Presets

Cohesion c (kPa)

Friction angle φ (°)

Unit weight γ (kN/m³)

Footing width B (m)

Embedment depth (m)

Factor of safety

Terzaghi's equation predicts the ultimate bearing capacity of a shallow footing as the sum of cohesion, surcharge, and self-weight terms, each with a bearing-capacity factor that grows sharply with the soil friction angle. Dividing by a factor of safety gives the allowable pressure. Educational tool, not a geotechnical design.

▶ Run in Python

Data Inspector

Nc30.1

Nq18.4

Nγ22.4

Ultimate qult1201 kPa

Governing equation

q_{u} = c N_{c} + γ D_{f} N_{q} + \frac{1}{2} γ B N_{γ} = 10 (30.1) + 27 (18.4) + \frac{1}{2} (18) (2) (22.4) = 1201 kPa

Reading this result: Mixed c-φ soil: all three terms contribute — deeper embedment and a wider footing both push the ultimate capacity higher.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Groundwater

open full solver →

Groundwater Well DrawdownLive

Thiem steady-state cone of depression

Controls

Presets

Pumping rate Q (m³/day)

Transmissivity T (m²/day)

Radius of influence R (m)

Pumping a well lowers the water table into a cone of depression. Under the Thiem steady-state solution the drawdown is s(r) = Q/(2πT)·ln(R/r): more pumping deepens the cone, higher transmissivity flattens it. Fundamental to well design, water supply, and contaminant capture.

▶ Run in Python

Data Inspector

Drawdown at well4.7 m

Drawdown at 50 m1.47 m

Radius of influence500 m

Governing equation

s (r) = \frac{Q}{2 π T} ln \frac{R}{r} = \frac{2000}{2 π \cdot 500} ln \frac{500}{r}

Reading this result: Drawdown is Q/(2πT)·ln(R/r): here it is about 4.7 m at the well and falls off logarithmically, so most of the depression sits in the first tens of metres.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

Need a private, branded version?

We build custom solvers and workflows for labs, firms, agencies, and courses — your parameters, your branding, your data.

Explore Custom Solver Sets →

More in the Structural & Geotechnical pack

Bridge Designer Multi-Story Frame Steel Connection Designer Roof Truss Analyzer Crane Boom Check Pedestrian Bridge Vibration Reinforced Slab Designer Wind Load Package

Frequently asked questions

What is the Embankment Settlement multi-solver?: Embankment Settlement is a guided workflow that chains 2 individual PolySim solvers into one end-to-end analysis, piping each result into the next step.
Is it free to use?: Yes. Every step runs entirely in your browser using real numerics — no install, no account, no cloud cost. Custom or private solver packs are available as a paid service.