How do I simulate a transmission line?

Open this page and use the live Heat Exchanger Sizing tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a transmission line from your own measurements.

Use case · powered by Heat Exchanger Sizing

Heat Exchanger Sizing for a transmission line

Simulate a transmission line live in your browser. This runs the real Heat Exchanger Sizing solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Fluid

open full solver →

2D Fluid (CFD) StudioLive

Stam stable-fluids · Navier–Stokes

Controls

Speed1×

Click and drag on the canvas to inject dye and velocity.

Presets

Viscosity

Injection force

Dye amount

▶ Run in Python

Data Inspector

Grid96×96

Total dye0

Mean speed0.000

Max speed0.000

Enstrophy0.00e+0

Governing equation

\frac{\partial u}{\partial t} + (u \cdot \nabla) u = - \frac{\nabla p}{ρ} + 1.0 e - 7 \nabla^{2} u, \nabla \cdot u = 0

Reading this result: Near-zero viscosity: momentum barely dissipates, so vortices persist and the flow tips into turbulent, chaotic mixing.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Thermal Resistance

open full solver →

Composite Wall Heat TransferLive

R-value & U-value

Controls

Presets

Drywall (mm)

Insulation (mm)

Brick (mm)

Inside temp (°C)

Outside temp (°C)

Heat flows through a wall like current through resistors in series. Each layer's thermal resistance is its thickness over its conductivity; adding them gives the total R-value, and the heat flux is the temperature difference divided by it. Insulation, with very low conductivity, dominates the R-value — the steep temperature drop shows where it does its work.

▶ Run in Python

Data Inspector

Total R-value2.71 m²K/W

U-value0.37 W/m²K

Heat flux9.6 W/m²

Governing equation

R = \sum \frac{L _{i}}{k _{i} A} = 2.71 \frac{m ^{2} K}{W}, Q = \frac{Δ T}{R} = 9.6 \frac{W}{m ^{2}}

Reading this result: The insulation layer carries the most thermal resistance, so the temperature falls most steeply across it. A total R-value of 2.71 m²K/W lets 9.6 W/m² flow for this 26°C difference.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Heat 3d

open full solver →

3D Heat Diffusion StudioLive

3D finite difference · ∂u/∂t = α∇³u

Controls

Speed1×

Presets

Diffusivity α

▶ Run in Python

Data Inspector

Grid40³

Cells64,000

SchemeExplicit FD

Governing equation

\frac{\partial u}{\partial t} = 0.12 \nabla^{2} u = 0.12 (u_{xx} + u_{y y} + u_{z z})

Reading this result: Heat spreads outward at a rate set by the diffusivity — each cell relaxes toward the average of its six neighbors every step.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Heat Exchanger Sizing tool models a transmission line with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Heat Exchanger Sizing

Heat Exchanger Sizing for a solar farm Heat Exchanger Sizing for a wind turbine Heat Exchanger Sizing for a home battery Heat Exchanger Sizing for an EV charger Heat Exchanger Sizing for a power grid Heat Exchanger Sizing for a heat pump Heat Exchanger Sizing for a gas turbine Heat Exchanger Sizing for a hydro dam

Other ways to simulate a transmission line

Fourier Transform for a transmission line Bode Plot for a transmission line Filter Designer for a transmission line PID Controller for a transmission line Transmission Line for a transmission line Op-Amp Circuits for a transmission line

Frequently asked questions

How do I simulate a transmission line?: Open this page and use the live Heat Exchanger Sizing tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a transmission line from your own measurements.