How do I simulate a mezzanine floor?

Open this page and use the live Steel Connection Designer tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.

Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.

Can I use my own numbers?

Absolutely — every input is adjustable, and with data import you can drive a mezzanine floor from your own measurements.

Use case · powered by Steel Connection Designer

Steel Connection Designer for a mezzanine floor

Simulate a mezzanine floor live in your browser. This runs the real Steel Connection Designer solver — adjust the inputs, watch it respond instantly, and export the result. No install, no account.

For:Students Researchers Educators Engineers Hobbyists & Makers K-12 Students First Responders

Shear Moment

open full solver →

Shear & Moment DiagramsLive

simply-supported beam

Controls

Presets

Span L (m)

Point load P (kN)

Load position a (m)

Uniform load w (kN/m)

Shear and bending-moment diagrams show the internal forces along a beam. Shear jumps at each point load; the moment is the running integral of shear and peaks where shear crosses zero. Engineers size beams for this maximum moment. Educational tool, not a substitute for structural design.

▶ Run in Python

Data Inspector

Reaction A28.3 kN

Reaction B21.7 kN

Max moment46.6 kN·m

at x2.01 m

Governing equation

\frac{d V}{d x} = - w = - 5, \frac{d M}{d x} = V, M_{m a x} = 46.6 kN\cdotm

Reading this result: Combined loading: reactions RA=28.3 and RB=21.7 kN, and the maximum moment 46.6 kN·m lands at x=2.0 m where shear crosses zero.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Mohrs Circle

open full solver →

Mohr's CircleLive

2D stress transformation

Controls

Presets

σx (MPa)

σy (MPa)

τxy (MPa)

Mohr's circle is a graphical way to transform a 2D stress state to any rotated axis. The circle's center is the average normal stress and its radius is the maximum shear. Where it crosses the horizontal axis gives the principal stresses — the orientation with zero shear. Educational tool.

▶ Run in Python

Data Inspector

σ₁ (max principal)92.4 MPa

σ₂ (min principal)7.6 MPa

τmax42.4 MPa

Principal angle22.5°

Governing equation

σ_{1, 2} = \frac{80 + 20}{2} \pm (\frac{80 - 20}{2})^{2} + 3 0^{2} = 92.4, 7.6 MPa

Reading this result: The circle radius sets τmax = 42.4 MPa on planes 45° from the principals; rotate the element by 22.5° to reach the shear-free principal orientation.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

↓

Fatigue

open full solver →

Fatigue (S-N Curve)Live

failure under cyclic load

Controls

Presets

Ultimate strength (MPa)

Stress amplitude (MPa)

Ferrous (has endurance limit)

Repeated loading well below the ultimate strength can still break a part — metal fatigue. The S-N curve plots stress amplitude against cycles to failure. Steels have an endurance limit: below it they last essentially forever, but aluminum has none and eventually fails at any stress. Cause of many catastrophic aircraft and bridge failures.

▶ Run in Python

Data Inspector

Endurance limit250 MPa

Cycles to failure1.17e+5

Verdictfinite life

Governing equation

N = (\frac{σ _{a}}{σ _{f}^{'}})^{1/ b}, σ_{a} = 300 MPa \Rightarrow N = 1.17 e + 5 cycles

Reading this result: At 300 MPa the part fails after about 1.2e+5 cycles. Drop below the 250 MPa endurance limit to reach infinite life.

Runs locally in your browser — free forever. Scale to the cloud when reality gets heavy.

or unlock everything with Pro →

About this simulation

The full Steel Connection Designer tool models a mezzanine floor with the same numerics engineers and scientists use — running entirely client-side. Change any parameter and the result updates in real time, so you can build intuition, check a design, or teach the concept without spreadsheets or installs.

More you can do with Steel Connection Designer

Steel Connection Designer for a cantilever balcony Steel Connection Designer for a bridge girder Steel Connection Designer for a floor joist Steel Connection Designer for a roof rafter Steel Connection Designer for a steel beam Steel Connection Designer for a timber deck Steel Connection Designer for a crane boom Steel Connection Designer for a retaining wall

Other ways to simulate a mezzanine floor

2D Fluid (CFD) for a mezzanine floor 3D CFD for a mezzanine floor 3D FEA Space Frame for a mezzanine floor FEA Truss for a mezzanine floor Meshing + BCs for a mezzanine floor RLC Circuit for a mezzanine floor

Frequently asked questions

How do I simulate a mezzanine floor?: Open this page and use the live Steel Connection Designer tool below — set your inputs and the simulation runs instantly in your browser using real numerics. No install, no account needed.
Is it free?: Yes. The simulation runs free in your browser. A one-time unlock or a Pro plan adds advanced parameters, saved presets, data import, and clean exports.
Can I use my own numbers?: Absolutely — every input is adjustable, and with data import you can drive a mezzanine floor from your own measurements.